How To Wear

Detailed Steps

STEP1:Clean Your Skin

Body oils, lotions, sunscreen, or perfume residue can weaken adhesion and cause slipping or curling edges.

How to do it

Gently cleanse the upper chest and collarbone area with a mild cleanser or body wash. Wash your hands.

Make sure both your skin and hands are completely dry before applying. Avoid perfume or oily lotion on the day of wear.

Niidor Tips

If you expect to sweat or move a lot (e.g., parties or dancing), bring an extra pair or nipple covers for backup.

STEP2:Position the Cups

Before removing the protective film, hold the cups up to your chest to determine the ideal placement.

How to do it

Stand in front of a mirror. Position each cup so the bottom edge sits slightly below your natural breast crease.

The cups should face forward and slightly upward for lift. Mark or remember where the inner edges meet.

Niidor Tips

The distance between the cups affects cleavage. Closer placement creates more cleavage, while wider placement looks more natural.

STEP3:Apply and Press

Remove the protective film from one cup and apply it to your breast, following your planned positioning.

How to do it

Lean forward slightly to help your breasts fall into the cups naturally. Press the cup firmly from the bottom up and from the center outward.

Hold for 5-10 seconds to ensure adhesion. Repeat with the second cup, checking for symmetry.

Niidor Tips

For extra lift, position the bottom edge of each cup slightly lower than you think necessary.

STEP4:Adjust and Secure

Once both cups are in place, make any final adjustments for comfort and appearance.

How to do it

Check in the mirror that both cups are level and symmetrical. Gently lift and reshape your breasts if needed.

Press around the edges of each cup to ensure full contact. Wait a few minutes before putting on your outfit.

Niidor Tips

Avoid repositioning too many times, as this can reduce adhesive strength. Plan your placement carefully the first time.

If your skin is sensitive or recently treated, we recommend doing a patch test first. Apply a small piece of the adhesive to your inner arm for 24 hours. If there's no irritation, you can use it. Always consult your dermatologist if you have concerns about skin reactions.

Our adhesive bras can be worn comfortably for 8-12 hours. When properly applied to clean, dry skin, they provide secure hold without sliding. For extended wear or active events, we recommend reapplying or using our stronger adhesive options.

For hygiene reasons, adhesive bras should not be shared. However, they can be reused multiple times when properly cared for. After each use, gently hand wash with mild soap and water, air dry, and replace the protective film. With proper care, they can be reused 30-50 times.

Choose based on your outfit and support needs. Strapless styles work for off-shoulder looks, backless designs for low-back dresses, and push-up options for extra lift. Consider your cup size and the level of support required. Our size guide and customer service team can help you find the perfect match.

If adhesion is weak, ensure your skin is completely clean, dry, and free of lotions or oils. Press firmly for 10 seconds when applying. If the adhesive loses stickiness over time, gently wash it with mild soap and water to restore tackiness. Store with the protective film to maintain adhesion.

Our adhesive bras come in multiple sizes from A to DD cup. While they work for most sizes, larger cup sizes may need additional support for extended wear. We offer reinforced options and recommend checking our size chart. For sizes above DD, consider our specially designed full-support models.