Silicone Adhesive Bra

Fabric & Care Details（Sticky Insert Pads

1. Please follow these simple steps to ensure a secure and comfortable fit every time you apply our double-sided sticky insert pads:

• 1. Preparation Before Wearing

• Clear your breast skin thoroughly, making sure no lotion, essential oil, sunscreen or body powder remains; all greasy residue will drastically impair adhesive stickiness.
• Let skin air-dry fully before application, damp surface causes poor adhesion and easy edge lifting.
• Mark placement in front of mirror first with protective film intact; peel off one side liner only after confirming ideal position and keep the original liner well for post-wear storage.

2. Wearing Instructions

• Lean forward to let breasts naturally sink into pad indent, align the thick rounded base edge with your underbust crease, then press outward from center for 10 full seconds for stable sticking.
• Match two pads symmetrically on left and right sides, lift arms and move casually to verify no curling or peeling around edges.
• Max single-time wear limited to 6~8 hours to avoid skin stuffiness and discomfort.

3. Wash & Storage Care (Extend service life to 30–40 reuses)

Silicone Sticky Insert

• Rinse adhesive side gently with clean water and mild hand soap only; air-dry adhesive side up away from direct sunlight and hot hair dryer blow.
• Cover dry glue surface back with original protective liner and store inside matched storage box to guard against dust and viscosity loss.

Sponge Sticky Insert

• Hand wash softly and lay flat to air dry to prevent permanent deformation of padding shape.

Fabric & Care Details（Sticky Adhesive Insert Pads

1. Proper care is key to ensuring your Niidor sticky adhesive insert pads stay in optimal condition for up to 30~40 repeated wears:

1. After Every Wear

• Rinse the adhesive side of silicone inserts with room-temperature clean water to remove residual sweat and skin oils.
• Dispense a small amount of fragrance-free mild soap on your fingertips, rub the sticky surface in gentle circular motions to dissolve dirt and body residue.
• Thoroughly flush with cold clean water until all soap foam is fully removed from adhesive.

2. Drying and Storage

• Air-dry only: place pads adhesive-side up in cool shaded area, far from direct sunlight and all heat devices. Never use hair dryer or high-temperature drying tools.
• Once completely air-dried, firmly reapply the original protective film over the full adhesive surface.
• Lay inserts flat inside original storage box to prevent extrusion deformation and dust adhesion on glue.

3. Important Precautions

• ❌ Never machine wash, tumble dry or dry clean; these processes will ruin adhesive viscosity irreversibly.
• ❌ Keep away from alcohol, bleach and strong abrasive cleaners, which corrode adhesive and pad base material.
• ❌ Do not scrape adhesive surface with fingernails, scissors or any sharp hard items.
• ❌ Avoid folding inserts or stacking heavy objects on top during storage.

For Sponge Fabric Sticky Inserts

• Hand-wash gently with mild cleanser only, lay flat to air dry naturally to avoid permanent shrinkage or shape distortion.